Audix M1280B Miniaturized Condenser Microphone
Audix M1280B Miniaturized Condenser Microphone
The M1280B, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1280B condenser microphone is equipped with a cardioid capsule and is also available with hypercardioid, omnidirectional, or shotgun capsules. The M1280B has a very wide frequency response and may be used in a wide variety of stage, studio, and broadcast applications.
The M1280B miniaturized condenser microphone is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.
Designed, machined, assembled, and tested by Audix in the USA.
-
Transducer Type Condenser
Frequency Response 40 Hz – 20 kHz
Polar Pattern Cardioid, Hypercardioid, Omni, Shotgun
Output Impedance 150 ohms
Sensitivity 10 mV (C/HC), 12 mV (O), 18 mV (S) / Pa @ 1k
Equivalent Noise Level 21 dB (A-weighted)
Signal to Noise Ratio 73 dB
Maximum SPL ≥147 dB
Power Requirements 18 – 52 V
Dynamic Range 126 dB
Connector 3-pin XLRm
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish Machined Brass / Black Finish
Weight 28 g / 1 oz
Length 67 mm / 2.6 in
-
1x M1280B Miniaturized Condenser Microphone
1x CBLM25(opens a new window) 25′ Cable With Mini-XLRf – XLRm Connectors
1x MCMICRO(opens a new window) Microphone Stand Adapter
1x MCHANGER(opens a new window) Hanging Clip
1x External Windscreen
